All electronic papers are available for Society members to download free of charge through this web site. Some older papers for which the Society owns the copyright are also available publicly, while others are available for purchase by non-members at a nominal charge. Where the copyright is not owned by the Society then it is not possible to offer the papers to non-members.
For advanced search functionality such as boolean operators, see "Instructions" below.
Query returned 11751 results.
Closing the Loop Valorization of Industrial Waste of Composite Materials through Re-Design of Products from Detached Value Chains
Federica Cappelletti, Marta Rossi, Michele Germani // 2022
The literature lacks methodologies to make supply chains of composite materials circular. The proposed approach aims to transform scraps and off-specification products into secondary raw materials. ...
Co-Designing with AI in Sight
// 2022
Artificial Intelligence offers a wide variety of capabilities that can potentially address people's needs and desires in their specific contexts. This pilot study presents a collaborative method ...
COLLABORATIVE LEARNING IN INTERNATIONAL INTERDISCIPLINARY TEAMS
Petrova, Miroslava Nadkova (1); Geldres Piumatti, Ricardo (2); Canseco Castro De Steffen, Milagros Diez (2); Lucho Lingán, César Rubén (2) // 2022
Collaborative Modeling of Use Case & Damage Scenarios in Online Workshops Using a 3D Environment
Sergej Japs (1), Sebastian Schmidt (1), Frank Kargl (2), Lydia Kaiser (3), Aschot Kharatyan (1), Roman Dumitrescu (4) // 2022
The development of technical systems requires close cooperation of stakeholders from different disciplines. This collaboration takes place in workshops. Driven by digitalization and by the current ...
Combined environments - challenges and potentials in the realistic component testing
Philipp Hüttich, Stefan Panek, Dieter Krause // 2022
Structural components can be exposed to extreme environmental conditions during operation over their service life. For this reason, they have to pass corresponding tests during development and ...
Comparing EEG Brain Power of Mechanical Engineers in 3D CAD Modelling from 2D and 3D Representations
Fanika Lukačević (1,2), Shumin Li (2), Niccolò Becattini (2), Stanko Škec (1) // 2022
Using the EEG features extracted from the EEG signals, the presented study investigates differences in the cognitive load posed on engineers while 3D CAD modelling in two different conditions, ...
Comparing the quality of documentation used in production equipment acquisitions and the impact on the performance of the acquired equipment – a pre study
Hagström, Malin Hane; Bergsjö, Dag; Furborg, Fredric; Aas, Rickard // 2022
There are often problems with design documentation, such as incomplete or missing and quality of input. A pre study within an engineering department for advanced machinery investigates the quality of ...
Compounding Composites from Raw Materials with Extrusion Directly on 3D Printer
Oscar Rundbäck Martinsson, Axel Nordin, Jože Tavčar // 2022
The materials most commonly used in 3D-printers are in a filament form. This is a barrier for users who want to have new types of filaments with different material compositions. A 3D-printer which ...
Computational Design of an Additively Manufactured Origami-Based Hand Orthosis
Melanie Oliveira Barros, Andreas Walker, Tino Stanković // 2022
This work investigates the application of origami as the underlying principle to realize a novel 3D printed hand orthosis design. Due to the special property of some origami to become rigid when ...
COMPUTATIONAL DESIGN, ADVANCED VISUALISATION, AND THE CHANGING NATURE OF CAD
Urquhart, Lewis; Petrakis, Konstantinos; Wodehouse, Andrew // 2022
Computer Aided Ergonomics: Evaluation Study of a Interaction Model for Digital Human Models
Alexander Wolf, Konrad Fackler, Magnus Reulbach, Sandro Wartzack, J // 2022
In user-centred design, digital human models hold the potential for proactive evaluations of ergonomics or discomfort in terms of a computer aided ergonomics tool. Therefore, models predicting human ...
Concept of a Multi-Agent System for Optimised and Automated Engineering Change Implementation
Ognjen Radisic-Aberger, Tim Weisser, Till Sassmannshausen, Johannes Wagner, Peter Burggr // 2022
Engineering changes are necessary to stay competitive, unavoidable and occur more frequently with increased product complexity. Currently, scheduling of engineering changes into production and supply ...
Conceptual Design in Metalworking Microenterprises: An Empirical Study in Tanzania
Eliab Opiyo (1), Santosh Jagtap (2), Sonal Keshwani (3) // 2022
Product design is a key aspect of human intelligence and creativity, attracting not only experts but also workers and self-employed without any formal design training. Although numerous people in ...
Connecting the Dots: Interlinking Crafts and Culture in Design Education
Anand, Puja; Bhasin, Alok // 2022
The question facing Design educators today is how to align the present generation of millennials with the sensitivity and appreciation of our rich cultural heritage? The paper is focused on the ...
Coordinated Property Driven Development
Adlin, Nillo; Juuti, Tero; Lehtonen, Timo // 2022
Characteristics-Properties Method/Property-Driven Development (CPM/PDD) has been a popular and widely applied theory for supporting the integration of product modelling and design process modelling. ...
Coping Asynchronous Modular Product Design by Modelling a Systems-in-System
Marc Zuefle (1,2), Sabine Muschik (2), Nikola Bursac (2), Dieter Krause (1) // 2022
This paper analyzes the potential of crossdisciplinary collaboration in the methodical development of Modular Design by harmonization asynchronous mechatronic system structures. Subsystem boundaries ...
Cost Optimization of Product Families Using Solution Spaces: Application to Early-Stage Electric Vehicle Design
Sebastian R // 2022
Companies offer products in different variants to reach more customers. This increases internal variety and cost. However, reducing those cost is difficult due to complexity. Complexity arises from: ...
Cost Sensitivity Analysis for Laser Powder Bed Fusion
Marco Mandolini (1), Mikhailo Sartini (1), Claudio Favi (2), Michele Germani (1) // 2022
Laser Powder Bed Fusion is the most widespread additive manufacturing process for metals. In literature, there are several analytical models for estimating the manufacturing cost. However, few papers ...
Creating a Multidisciplinary Collaboration Service-Learning Experience in Design Education
Sacha Joseph-Mathews (1), Marie Anna Lee (1), Nicole Kreidler (2) // 2022
The design process in most organizations is often collaborative and interdisciplinary in nature. Yet most institutions of higher learning do not offer students the opportunity to work in ...
CREATIVE DESIGN ACTIVITIES TO SUPPORT THE COMPLEX LEARNING ENVIROMENT OF THE CLASSROOM FOR CHILDREN WITH AUTISM SPECTRUM DISORDER (ASD)
Elmarakbi, Nesrin; Robson, Heather; Currie, Lucy // 2022
Critical Function Prototyping of an Automated Cleaning System for Photovoltaic Panels
Freyer, Magnus; Christensen, Kim A.; Olsen, Anna; Steinert, Martin // 2022
Critical function prototyping (CFP) is useful when developing product service systems. Focusing on testing the critical component of the system first, as opposed to the whole system, saves resources ...
CRITIQUE: A WORKSHOP TO ESTABLISH SHARED UNDERSTANDING AND CLEAR RESPONSIBILITIES BETWEEN DESIGN STUDENTS AND THEIR LECTURERS
Brosens, Lore (1,3); De Vos, Ellen (1,2,3); Emmanouil, Marina (1,3) // 2022
Cyber-Security Aware Design of Automated Systems
Ralf Stetter (1), Marcin Witczak (2), Markus Till (1) // 2022
One of the main current threats for producing companies is the possibility of cyber-space attacks. Due to several reasons, industrial companies need to connect their plants over some kind of ...
Dashboard-supported approach for feasibility and benefit analysis of Product-Service System-driven business models
Mahl, Tobias; Köhler, Christian; Collet, Philipp; Arnold, Dominik; Lins, Dominik; Kuhlenkötter, Bernd // 2022
Once a company decides to become a Product-Service System (PSS) provider, this inevitably means that the company's business model needs to be transformed. The development of a PSS is thus closely ...
Boolean Searches
The following examples demonstrate some search strings that use boolean operators:
- design community
Find rows that contain at least one of the two words. - +design +community
Find rows that contain both words. - +design community
Find rows that contain the word “design”, but rank rows higher if they also contain “community”. - +design -community
Find rows that contain the word “design” but not “community”. - +design ~community
Find rows that contain the word “design”, but if the row also contains the word “community”, rate it lower than if row does not. - +design +(>community <decisions)
Find rows that contain the words “design” and “community”, or “design” and “decisions” (in any order), but rank “design community” higher than “design decisions” - design*
Find rows that contain words such as “design”, “designs”, “designing”, or “designer”. - "some words"
Find rows that contain the exact phrase “some words” (for example, rows that contain “some words of wisdom” but not “some noise words”). Note that the " characters that enclose the phrase are operator characters that delimit the phrase. They are not the quotation marks that enclose the search string itself.
The Society's publications are indexed by Google Scholar, Scopus and other indexing bodies.