All electronic papers are available for Society members to download free of charge through this web site. Some older papers for which the Society owns the copyright are also available publicly, while others are available for purchase by non-members at a nominal charge. Where the copyright is not owned by the Society then it is not possible to offer the papers to non-members.
For advanced search functionality such as boolean operators, see "Instructions" below.
Query returned 11751 results.
AN INVESTIGATION INTO LIMITED INTEGRATION OF COMPUTATIONAL DESIGN SYNTHESIS IN COMMON DESIGN PRACTICE
Bolognini, F.; Jauregui Becker, J. M.; Schotborch, W. O. // 2012
The paper is an investigation into the limited integration of computational design synthesis (CDS) in common design practice. The work analyses the problem from three different points of views: ...
An ontology-representation of the integrated product engineering model
Albers, A.; Braun, A.; Schmalenbach, H. // 2012
Complexity is becoming a vast challenge in product engineering. Complex products necessitate even more complex engineering processes for their realization. Model-based approaches aim at reducing ...
Analysing process-oriented BIM execution plan using MDM
Jacob, J.; Varghese, K. // 2012
Building Information Modelling (BIM) Execution Plan (BEP) is a complex process model used to represent the lifecycle process in modern building projects. The complexity is caused by the system ...
ANALYSING PRODUCT DEVELOPMENT WORKING PRACTICES FOR ENHANCING INNOVATION THROUGH COLLABORATION AND SIMULATION
Galea, A.; Francalanza, E.; Farrugia, P. J.; Borg ,J. C. // 2012
Both stakeholder collaboration and artefact simulation are important for supporting innovation, the first through the availability of more ideas and the latter for analysing the feasibility of these ...
Analysis of User Feelings during Interface Operation: Implictions for Creative Design
Georgiev, G. V.; Nagai, Y.; Taura, T.; Noda, S.; Willy, D. // 2012
This research proposes a new approach for creative design based on comprehension of human feelings during user interface operation. The discussed method in this approach captures verbal input during ...
Ansatz zur crashsicheren Auslegung von Leichtbaukonstruktionen unter besonderer Ber (Members only )
Klein, Daniel; Lindner, Christian; Wartzack, Sandro // 2012
Particularly in the automotive sector the importance of lightweight constructions is increasing. The reasons for this development vary from more strict limitations of the exhaust of carbon dioxides ...
Ansatz zur flexiblen Gestaltung modularer Bauweisen - Dilemma zwischen Standardisierung und Flexibilit (Members only )
Siebel, Johannes; Schindler, Christian // 2012
The focus of this paper is the dilemma between the flexibility to react on different customers demands and the wish to standardise products to createeconomical benefits. Several ...
APPLICATION OF SENSITIVITIES ON SIMULATION-DATA-BASED METAMODELS DURING THE PRODUCT SYNTHESIS
Ziegler, P.; Breitsprecher, T.; Walter,M.; Westphal, C.; Wartzack, S. // 2012
This research work focusses on a methodology to support the product developer at the product synthesis, which can be implemented in a design support tool. The method uses metamodels, which can ...
APPLICATION OF THE MECHATRONIC-SYSTEM-MODEL-APPROACH FOR THE DEVELOPMENT OF AN INDUSTRIAL ANNELING SIMULATOR
Follmer, M.; Hehenberger, P.; Zeman, K. // 2012
Currently, there is a critical lack of methods as well as software-tools supporting the inter-disciplinary aspects of the development process of mechatronic products, especially in the conceptual ...
APPLYING BIOINFORMATICS ANALYSIS PRINCIPLES TO CAD DATA TO BETTER CHARACTERIZE AND IMPROVE THE ENGINEERING DESIGN PROCESS
Nguyen, P. T.; Steinert, M.; Carroll, A.; Leifer, L. // 2012
We propose to systematically collect CAD data from users and to analyse them algorithmically in order to understand, model and improve engineering Design processes. We classify designers in this case ...
Applying Geometric Relationship in Product Design
Hyo ,Jin Koh // 2012
Geometry and the golden ratio in art, architecture and design are frequently used as a way to perceive aesthetically pleasing structures rather than as a principle to further develop visual coherence ...
Architecture and realization of a selflearning engineering assistance system for the use within sheetbulk metal forming
Breitsprecher, Thilo; Wartzack, Sandro // 2012
Substantial efforts have been taken in the past to integrate manufacturing related and design– relevant knowledge into the product development process. A common approach is to provide this knowledge ...
Architecture migration using DSM in a large-scale software project
Maki, T. // 2012
In product line development (PLD), maintaining architecture against the rapid changes in market requirements and the technical environment is important. When maintaining architecture, architecture ...
Assembly Target specifc Structuring of modular Product Families
Halfmann, Niklas; Krause, Dieter // 2012
The structuring of products is awarded the highest potentials for assembly effort reduction of variant product families. A research in corresponding literature in the field of engineering design ...
ASSEMBLY TIME ESTIMATION MODEL FOR EARLY PRODUCT DESIGN PHASES – CONCEPT DEVELOPMENT AND EMPIRICAL VALIDATION
Halfmann, N.; Krause, D. // 2012
Concept development for products designed for assembly requires continous analysis of the resulting production processes. Exisiting methods for assembly time calculation require high quality of ...
Assessing the 3D Visualisation Skills of Engineering Students and Developing Techniques for Support
Milne, Mark; Morris, Richard; Covill, Derek; Katz, Tim // 2012
The aim of this study was to investigate the 3D visualisation skills of a group of engineering students undertaking a first year BEng course in Mechanical Engineering, and in particular a module in ...
ASSESSMENT OF ANTHROPOMETRIC METHODS IN HEADSET DESIGN
Stavrakos ,S.-K.; Ahmed-Kristensen, S. // 2012
Assessing consumer products for usability and comfort often involve expensive user trials. This paper examines the incorporation of anthropometry in the design of external-ear devices. Two studies ...
Assessment of Design Competencies by a Five Level Model of Expertise
Albers, Albert; Turki, Tarak; Lohmeyer, Quentin // 2012
In recent years, enabling competencies has become more and more relevant in design education and design practice. Various problem-orientated and project-based learning approaches allow students to ...
Assessment of Engineering Design Theses
Watty, Robert; Kreimeyer, Matthias // 2012
To evaluate a student’s work best possible, the assessment of theses written as part of the curriculum has to meet certain standards from both an academic and an industrial perspective to fully ...
ASSUMPTIONS FOR DISTRIBUTED CONCURRENT DESIGN AND DECISION MAKING
Nyström, C. A.; Olsson, H.; Asproth, V. // 2012
This paper identifies and presents assumptions and critical factors for succeeding with Distributed Concurrent Design. The method used, is a brief literature study and experiences based on empirical ...
AUTOMATED CLASSIFICATION INTO THE BIOMIMICRY TAXONOMY
Vandevenne ,D.; Verhaegen ,P.-A.; Dewulf, S.; Duflou, J. R. // 2012
Ask Nature is a publicly available tool that provides relevant bio-inspiration in the early design stage. The tool’s main limitation is the manual work required to expand its biological strategy ...
Balancing Design Project Supervision and Learning Facilitation
Louise, M // 2012
In design there is a long tradition for apprenticeship, as well as tradition for learning through design projects. Today many design educations are positioned within the University context, and have ...
Bauhaus and Ming-Style – A Comparative Study to Contribute to the Understanding of Cultural Impact on Product Design
Wu, Wenyu; Brezing, Alex // 2012
the global design community, the name of the famous German institution stands for one of the biggest influences on modern design. Bauhaus furniture meant a disruptive change in style in its time, ...
BENEFITS OF THE USE OF VIRTUAL ENVIRONMENTS IN PRODUCT DESIGN REVIEW MEETING
Aromaa, S.; Leino, S. -P.; Viitaniemi ,J.; Jokinen, L.; Kiviranta, S. // 2012
Design reviews are important milestones within a product development process and efficient tools for sharing information about the product. By using Virtual Environments (VEs) in the review meetings ...
Boolean Searches
The following examples demonstrate some search strings that use boolean operators:
- design community
Find rows that contain at least one of the two words. - +design +community
Find rows that contain both words. - +design community
Find rows that contain the word “design”, but rank rows higher if they also contain “community”. - +design -community
Find rows that contain the word “design” but not “community”. - +design ~community
Find rows that contain the word “design”, but if the row also contains the word “community”, rate it lower than if row does not. - +design +(>community <decisions)
Find rows that contain the words “design” and “community”, or “design” and “decisions” (in any order), but rank “design community” higher than “design decisions” - design*
Find rows that contain words such as “design”, “designs”, “designing”, or “designer”. - "some words"
Find rows that contain the exact phrase “some words” (for example, rows that contain “some words of wisdom” but not “some noise words”). Note that the " characters that enclose the phrase are operator characters that delimit the phrase. They are not the quotation marks that enclose the search string itself.
The Society's publications are indexed by Google Scholar, Scopus and other indexing bodies.